How To Make The Computer Display A Message During Network Outage In Windows 2000, Windows 2003, Windows 98, Windows NT, Windows Vista, Windows XP?

If you need to monitor a remote IP address on the Internet,

For example:-

Your Web Page, An Internet-Enabled printer, or Another Server, you can use the PING command at the Windows 2000 DOS prompt to see whether or not the device is active. PING displays the time it takes for communication to reach the site and back.

ping {The Site Name}

To ping your own computer, the loop-back address, type,

ping 127.0.0.1

However, this only pings a device four times, and then stops. Using the “-t” parameter will run the ping command until you press CONTROL-C at the prompt.

For example:-

ping -t 127.0.0.1

While this may prove useful, it can quickly fill a DOS window with tons of messages, making it hard to tell at first glance if an Internet address is not up. What you need is a way to display messages only if the intended address does not respond, or time out. Luckily, this DOS command will do the trick:

How To Enable Sounds In Windows 2000, Windows 2003, Windows 98, Windows NT, Windows Vista, Windows XP?

Steps:-

1.)Click on Start button.

2.) Click on Run option.

3.) Type “services.msc” (Without quotes).

4.) Click on OK.

5.)  Find the “Windows Audio” service.

6.) Right-click on it.

7.) Select Properties.

8.) Select “Automatic” instead of “Disabled” in the startup type box.

8.) Click on Apply.

9.) Click on Start.

10.) Click on OK.

Alternatively, you can double-click the Sounds and Audio Devices applet in Control Panel, and select e Enable Windows Audio check-box.

11.) Reboot your computer.

How To Enable CD Burning In Windows 2000, Windows 2003, Windows 98, Windows NT, Windows Vista, Windows XP?

Note: With some third-party software, you may be able to burn CDs without starting the IMAPI CD-Burning COM Service. By The Way, some people say that it is recommended you leave this service disabled if you want to speed up the Nero Burning ROM startup.

Lamer Note:- Yes, you DO have to have a CD burner installed or else this tweak will be useless for you. It DOES NOT turn a standard CD Drive into a CD-R or CD-RW…

To have CD burning capabilities on Windows Server 2003 follow the steps below:-

1.) Click on Start button.

2.) Click on Run option.

3.) Type “services.msc” (Without quotes).

4.) Click on OK.

5.) Find the “IMAPI CD-burning COM” service.

6.) Right-clickon it.

7.) Select Properties.

8.) Select “Automatic” instead of “Disabled” in the startup type box.

9.) Click on Apply.

10.) Right-click the “IMAPI CD-burning COM” service.

11.) Select Start.

12.) Click on OK.

How To Delete The Recycle Bin Icon From The Desktop In Windows 2000, Windows 2003, Windows 98, Windows NT, Windows Vista And Windows XP?

To delete the Recycle Bin icon from the Windows XP/2003 desktop follow these steps:-

1.) Open Registry Editor.

2.) Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Desktop\NameSpace

3.) Find the following key:

{645FF040-5081-101B-9F08-00AA002F954E}

Delete this key.

Note:- As always, before making changes to your registry you should always make sure you have a valid backup. In cases where you’re supposed to delete or modify keys or values from the registry it is possible to first export that key or value(s) to a .REG file before performing the changes.

4.) Close Registry Editor.

There is no need to reboot.

5.) for Wait a few seconds.

The icon disappears from the desktop.

To restore the Recycle Bin icon from the Windows XP/2003 desktop follow these steps:- In order to restore the Recycle Bin icon to the desktop just re-create the missing key (or import it back to the registry in case you’ve exported it earlier).

1.) Open Registry Editor.

2.) Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Desktop\NameSpace

3.) Create the following key:

{645FF040-5081-101B-9F08-00AA002F954E}

(Copy/paste, including the brackets).

How To Delete Files Permanently In Windows XP, Windows 2003, Windows 2000, Windows Vista, Windows NT And Windows 98 Without They Going In Recycle Bin?

You can delete files immediately without having them move to the Recycle Bin first.

There are 2 ways to do so:

First Method:-

Delete the file, files or directories while pressing SHIFT key while deleting.

Second Method:-

1.) Click on  Start button.

2.) Click on Run option.

3.) Type gpedit.msc

4.) In Group Policy select User Configuration.

5.) Select Administrative Templates.

6.) Select Windows Components.

7.) Select Windows Explorer.

8.) Find the “Do not move deleted files to the Recycle Bin” setting.

9.) Set it to “Enabled”. (Without the quotes).

How To Configure A Shortcut To ‘Run As’ A Different User In A Shortcut In Windows Xp, Windows Vista, Windows 98, Windows 2000, Windows 2003 And Windows NT?

This tip only works on shortcuts.

Steps:-

1.) Create a short cut to one of your key programs.

2.) Right click on the short cut.

3.) Click on Properties.

4.) Click on Advanced Button.

5.) Check the Run with Different Credentials box.

The idea behind ‘Run As’ is to encourage you to log on as an ordinary user, and then use ‘elevated rights’ when you need to run the administrative tools. What it does is save you having to log off and then logon again as the administrator.

How To Disable Auto-Start Of Applications On Startup In Windows Xp And Windows Vista?

Using this, you can minimize the startup time of windows XP and Vista also. You can disable some optional windows applications like windows messenger, Yahoo messenger, QuickTime and many others auto startup programs that run automatically when you start your computer.

Follow the given steps to disable the windows auto run applications:

To use this feature, you will need to be logged into your computer with administrative rights.

1.) Click on Start button.

2.) Click on Run option.

3.) Type msconfig .

4.) Press Enter key.

A small System Configuration Utility dialog box will appear with many options like General, System.ini Win.ini, Boot.ini, Services, Startup and Tools.

5.) Select Startup tab.

6.) Uncheck the applications that you want to disable from windows startup.

7.) Click on Apply button.

8.) Click on Ok button.

9.) Close all the programs and restart your computer.

How To Create A System State Data Backup In Windows Xp, Windows 2000 and Windows Vista?

Using System State backup technique, you can create the backup of windows critical components on any system drive and this backup file can be used if the original copy is lost, damaged, or destroyed. On windows 2000/XP/Vista, system state data wizard will back up the following components.

• Windows registry

• Windows boot files

• COM+ class registration database
  

But if you are running domain controller, system state data wizard backed up the following components.

• Active Directory

• System volume (SYSVOL)

• Windows registry

• Windows boot files

• COM+ class registration database

Follow The Steps Given Below To Run System State Data Backup Wizard:-

To use this feature, you will need to be logged into your computer with administrative rights.

1.) Click on Start button.

2.) Click on  All programs.

3.) Click on  Accessories.

4.) Click on System Tools.

5.) Click on Backup.

Now by default backup wizard will start.

6.) Click on advanced mode option to change the backup settings.

Here a dialog box will appear with title “Backup Utility”.

7.) Select “Welcome” tab.

8.) Click on Backup Wizard [Advanced] button to create backup of windows important components.

9.) Click on Next button to continue backup wizard.

10.) Select option “Only back up the System State date” on what to back up page.

11.) Click on Next button.

12.) Click on Browse button to specify the destination for backup file.

13.)Set backup file name under “Type a name for this backup” box.

14.) Click on Next button.

15.) Now verify your selected settings and click on Finish button to start the backup process.